Van Docking Ramps
- Van Docking ramps can be manufactured in various sizes and widths to allow vans / smaller vehicles to access loading docks.
- Side platforms with access steps can be provided, along with handrails and various decking options.
- Ramps can be fixed or mobile to allow them to be removed from the dock to allow access for HGVs.
- Ramps can be fixed height or height adjustable so they can be positioned flush to the dock height or set below dock to align the vehicle bed to the loading dock.
- Different capacities, widths, incline lengths, level off /platform lengths and colours can be provided to suit your application.
- See a selection of examples below:
- Example 1 (below): This ramp is a typical application with a fixed or adjustable height. The van bed can be set close to the loading dock level and accessed using a removable dock plate & a D-Section bumper can be mounted in front of the dock leveller. Alternatively the ramp height can be adjusted so it is flush to the dock height to allow access into the building. This version can be fixed or mobile.
- Example 2 (below): A typical fixed height ramp to raise the van to the same height as the loading dock.
- Example 3 (below): The height of this ramp can be adjusted using trailer landing legs mounted either side.
- Example 4 (below): A larger working area can be created using our modular platforms.
- Example 5 (below): A pair of fixed height ramps can be provided up to a maximum recommended height of 400mm.