Traffic Lights

• Strongly recommended for use on all loading bays as a universally recognized method of improving communication, and helping to reduce accidents caused by drivers pulling away whilst loading/unloading is still taking place.
• All lights are supplied without sensors, switches or control systems. Circuit design and installation to be completed by others.

© EC European Community Registered Design 000321161-0001

• With 24 LED’s per 100mm diameter array, these traffic lights are approximately equivalent in brightness to a 60W incandescent lamp, but offer significant energy savings, and increased lifespan.
• Compact, easy to install design.
• Supplied with 4m of cable for electrical installation.
• High visibility units – LED’s in direct view; no lens required.
• A regulated power supply with a maximum voltage of 24.5v DC is required. We recommend our power supply is used to ensure correct voltages.
• Where radio communications/transmitters are present or fluctuations in power supplies are likely to occur we recommend filters are added to these lights. These are priced at an additional 10%.
• Specials available on request, e.g. Larger size, Arrows, Chevrons or Pointers.

• Durable Polycarbonate casing
• Removable slot-in hoods, which prevent interference from other light sources.
• 210mm diameter lenses.
• High light output with simple maintenance.
• Easy to install fixings with full swivel action, allowing the light source to be set at exactly the right angle.
• Suitable for wall or post mounting.
• LED (60W equivalent)
• 240v supply required.

• High impact ABS outer casing and lens hoods to reduce interference from other light sources, with 150mm diameter shatterproof Polycarbonate lenses.
• Features a very powerful output for increased visibility.
• Suitable for wall mounting using the brackets included.
• 5W power consumption.
• 240v supply required.

• A low cost, highly effective product.
• Standard 60 Watt bulb combines high output with simple maintenance.
• Can be used indoors or outdoors.
• Separate units allow for installation in awkward locations where one larger unit would not fit.
• 240v supply required.