Overview
Vehicle bumpers are rubber bumpers, designed to protect vehicles/HGVs, loading dock equipment and the loading docks they are visiting.
Various sizes/shapes available to suit your requirements.
For details of fixing holes in bumpers please see the pdf specification sheets available to download from the spec table below.
Please Note: vehicle bumpers are not suitable for fitting to loading docks.
Type 7: Curved D Section Vehicle Bumper
- D-section profile
- 70mm thick.
- Counterbored fixing holes.
- Fixings: 10mm diameter.
Type 8: Rectangular Vehicle Bumper
- 50mm thick.
- Three counterbored fixing holes.
- Fixings: 10mm diameter.
Type 10: Mouse Shaped Vehicle Bumper
- For use where only a small bumper is required, for example when doors are swung open.
- Two counterbored fixing holes.
- Fixings: 6mm diameter.
Our range of rubber vehicle bumpers
| Model | Details | Type | W x L x T mm | No. of holes | Weight Kg |
|---|---|---|---|---|---|
| TWVB-D-96 | View | 7 | 85x2440x70 | 10 | 22.5 |
| TWVB-D-48 | View | 7 | 85x1220x70 | 5 | 11.3 |
| TWVB-D-20 | View | 7 | 85x500x70 | 2 | 4.5 |
| TWVB-D-10 | View | 7 | 85x250x70 | 2 | 2.3 |
| TWVB-D-8 | View | 7 | 85x200x70 | 2 | 1 |
| TWVB-10-2 | View | 8 | 50x255x50 | 3 | 0.64 |
| TWVB-16-2 | View | 8 | 50x400x50 | 3 | 1 |
| TWVB-MOUSE | View | 10 | 35x65x20 | 2 | 0.03 |